Beacon-Morris Convectors are engineered for both forced hot water and two-pipe steam heating system installation with heating elements of lightweight non-ferrous construction. They are available in (7) basic types to meet a wide range of heating applications in institutional buildings, hospitals, hotels, office buildings, schools, apartments and other structures. A variety of cabinet enclosure styles permits the selection of an attractive and functional installation to blend with any building interior -modem or traditional.
Cabinet Unit Heater
The Beacon-Morris Cabinet Unit Heater is the industry’s most recent design. Years of manufacturing and engineering experience combined with a concern for appearance have resulted in a crisply styled unit that will blend with almost any room decor and provide reliability, durability, individual control and quiet operation. The wide selection of floor, wall and ceiling units with a variety of air flow arrangements allows for exactly matching design requirements. Field repainting to match the decor is possible and factory applied decorator colors are available as an option. Recessed models are provided with a field installed wall seal that allows for full or partial recessing depending on the model. The wall […]
PolyPropylene
Now available, Polyflue™, a unique polypropylene flue gas venting system for Category II and IV gas fired heating appliances. Polyflue has a much higher safety factor than PVC / CPVC plastic pipe used on these same heating appliances. Polyflue also provides faster and cleaner installations than PVC / CPVC. Polyflue can be sourced through HVAC and/or plumbing wholesale distribution channels. Polyflue is the ONLY polypropylene venting system that is listed by UL, Inc, to the complete ULC S636 test standard at 0” clearance to combustibles at 230°F / 110°C maximum flue gas temperature. It is also the ONLY polypropylene venting system that allows the required locking bands to be installed during or […]
Special Gas Vent (AL29-4C)
Single Wall Special Gas Vent: Saf-T Vent EZ Seal is the fastest and most reliable venting solution for Category I, II, III, and IV gas appliances – with no RTV sealant required. AL29-4C® Stainless Steel 3” through 16” diameters Factory built-in silicone seal 3”-5” primarily for Residential applications Tested and Listed to UL1738/ULCS636 by Underwriters Laboratories, Inc Double Wall Saf-T Vent CI Plus is the leading commercial double-wall UL 1738 special gas vent system for condensing heating appliances, made from superferritic stainless steel. With 1″ airspace (and optional 1″ fiber blanket) between the inner wall and the outer wall, CI Plus reduces the required clearance to combustibles and has lower […]
Storage Tanks
RBI storage tanks are designed to provide large volume, continuous or intermittent hot water supply while maintaining a constant outlet temperature. Ranging in size from standard 200 to 1,000 gallon capacities to custom-built 3,000-gallon units, RBI hot water storage tanks offer complete application flexibility and are the perfect complement to RBI’s high-efficiency boilers and hot water heaters. Please visit rbiwaterheaters.com/StorageTanks for more information.