Beacon/Morris
Twin-Flo III
Kickspace heaters are the space-saving alternative to hot water baseboard. Designed to fit inconspicuously under a cabinet, in the floor, on or in the wall, kickspace heaters are ideal for hard to heat areas such as foyers, kitchens, and bathrooms. Hot water from the home’s boiler is circulated through the kickspace unit and the fan gently blows heated air into the room. The homeowner simply selects the fan speed, then the unit turns on and off automatically according to heating demand. Twin-Flo III ® kickspace heaters are your ideal solution wherever space is limited: Under Cabinets In Kitchens, Baths, and Foyers Under Stair Risers and Windows Please visit beacon-morris.com/twin-flo-kickspace-heater for more […]
Cabinet Unit Heater
The Beacon-Morris Cabinet Unit Heater is the industry’s most recent design. Years of manufacturing and engineering experience combined with a concern for appearance have resulted in a crisply styled unit that will blend with almost any room decor and provide reliability, durability, individual control and quiet operation. The wide selection of floor, wall and ceiling units with a variety of air flow arrangements allows for exactly matching design requirements. Field repainting to match the decor is possible and factory applied decorator colors are available as an option. Recessed models are provided with a field installed wall seal that allows for full or partial recessing depending on the model. The wall […]
Convector
Beacon-Morris Convectors are engineered for both forced hot water and two-pipe steam heating system installation with heating elements of lightweight non-ferrous construction. They are available in (7) basic types to meet a wide range of heating applications in institutional buildings, hospitals, hotels, office buildings, schools, apartments and other structures. A variety of cabinet enclosure styles permits the selection of an attractive and functional installation to blend with any building interior -modem or traditional.
Horizontal Unit Heater
Beacon-Morris Heating Equipment has had broad experience in the manufacture of steam/hot water unit heaters for many years. Offered in both horizontal and vertical air delivery models, Beacon-Morris unit heaters are a complete heat distributing plant, encased in an attractive, streamlined baked enamel housing. Designed for ceiling mounting, they provide a convenient, low cost method of heating warehouses, stores, factories, and other large open areas. Beacon-Morris, responding to the requirements of the heating industry, has now expanded its unit heater line to one of the most complete in the industry, twenty-three horizontal and fifteen vertical steam/hot water models.Vertical Unit Heater
Beacon-Morris Heating Equipment has had broad experience in the manufacture of steam/hot water unit heaters for many years. Offered in both horizontal and vertical air delivery models, Beacon-Morris unit heaters are a complete heat distributing plant, encased in an attractive, streamlined baked enamel housing. Designed for ceiling mounting, they provide a convenient, low cost method of heating warehouses, stores, factories, and other large open areas. Beacon-Morris, responding to the requirements of the heating industry, has now expanded its unit heater line to one of the most complete in the industry, twenty-three horizontal and fifteen vertical steam/hot water models.
Twin Pak
Easy to buy. Easy to handle. Easy to install. Beacon/Morris’ Twin Pak offers two sizes of enclosures: the compact TP-14, and the TP-20, a 20″-high, two-piece enclosure which will accommodate two tiers of element. Twin Pak’s functional slope top design has a pleasing look and enhances the appearance of medical buildings, conference rooms, dining rooms, lobbies, office suites-high traffic areas that demand good looks, durability and low price.
BRUT Unit Heater
Approved for residential use, thousands of homeowners have installed Beacon/Morris BRT units in their garages. By design, our BRT units are compact and fit nicely in the corner of a garage. The unique hanging mechanism allows the installer to mount the unit close to the ceiling, further keeping the heater out of the way of the homeowner. Most commonly, BRT garage heaters are used with natural gas. If natural gas isn’t available, units are available for use with propane as well. Beacon/Morris unit heaters not only keep your garage environment comfortable, but also may help prolong the life of your car’s engine by eliminating cold start-ups in the dead of […]
Duct Furnace
The “BMED” and “BMES” are power vented indoor duct furnaces. Model “BMED” offers bottom burner access and is typically ceiling suspended. The model “BMES” offers side access and is typically mounted on a non-combustible floor. Both models offer high efficiencies that achieve annual fuel savings of up to 25% over conventional natural vented unit heaters. Also featured is the factory installed power venter and sealed flue collector that controls combustion and excess air during on cycles. Standard Features: 10 sizes ranging from 100-400 MBH ETL certified for 80% efficiencies Aluminized steel heat exchanger 20 gauge Optional 409 and 321 stainless steel heat exchangers Single stage gas valve (STD) Optional two […]
Gas Fired Blower
The model “BMEB” high efficiency unit heater achieves annual fuel savings of up to 25% over conventional natural vented unit heaters. The “BMEB” features a factory installed power venter and sealed flue collector that controls combustion and excess air during on cycles. Standard Features: 10 sizes ranging from 100 to 400 MBH ETL certified for 80% efficiencies Aluminized steel heat exchanger- 20 gauge Optional 409 and 321 stainless steel heat exchangers Single stage gas valve (STD) Optional two stage and modulating gas valves Standard spark ignition Available in Natural or LP gas Easy burner access with individual removable burners Optional duct flange connection in lieu of discharge louvers 1O year […]
Optum Condensing Unit Heater
With a tri-metal stainless steel heat exchanger and a state-of-the-art proprietary combustion control system, Optum provides industry-leading thermal efficiencies of up to 99%*. The only fully modulating high-efficiency gas unit heater on the market, Optum utilizes a burner control and configuration that allows a 3:1 turndown for precision discharge temperature control that increases life expectancy and allows for reduced cycling. Available in 6 sizes (50 – 400 MBH), Optum brings a whole new sophisticated style to the unit heater arena with a beautiful commercial-grade brushed stainless steel jacket and contrasting black trim. Its corrosion-resistant exterior and double-wall construction provide both durability and increased efficiency through reduced heat loss. Units can […]