Bock Water Heaters
ASME 260 – 6,141 Gallon Horizontal Storage Tank
Horizontal, ASME Storage Tanks Available with or without Spray-On Insulation The exterior of non-insulated tanks are painted with a red oxide primer. Insulated tanks are coated with a sprayed-on rigid insulation that has an acrylic topcoat. Tanks are constructed and certified in accordance with ASME IV, part HLW for 125 psi and 150 psi. 5 year tank warranty.
ASME 260 – 6,141 Gallon Vertical Storage Tank
Vertical, ASME Storage Tanks Available with or without Spray-On Insulation The exterior of non-insulated tanks are painted with a red oxide primer. Insulated tanks are coated with a sprayed-on rigid insulation that has an acrylic topcoat. Tanks are constructed and certified in accordance with ASME IV, part HLW for 125 psi and 150 psi. 5 year tank warranty.
ASME Large-Volume Insulated – Jacketed Storage Tank
Vertical Storage Tanks with Capacities of 260 – 1,128 Gallons Tanks are constructed and certified in accordance with ASME IV, part HLW for 125 psi and 150 psi. 5 year tank warranty.
Bock® ASME 119-200 Storage Tank
Insulated, Glass Lined Steel ASME Storage Tank with Steel Exterior 119 Gallon and 200 Gallon Vertical ASME Storage Tanks Certified ASME construction. Twin 1-inch magnesium anode rods. Twin 1-inch NPT connections for relief valves (valves not included). Powder coated steel exterior. Cleanout Port. Standard 5 year tank warranty.
Bock® Model ST Storage Tank
Insulated, Glass Lined Steel Potable Water Storage Tank with Steel Exterior FOUR 2-Inch NPT connections – ideal for circulating-loop applications. Factory installed brass drain valve. Standard 5 year tank warranty. Powder coated steel exterior jacket. Robust non-ASME construction.
nDurance Light Commercial Electric
Point of Use Commercial Electric Water Heater Built for Long-Term nDurance! Robust thick-gauge steel tank construction Glass fused-to-steel tank interior Dual anode rods for double protection against corrosion Zinc-plated copper sheath elements designed to minimize scale build-up FIVE-YEAR Warranty 135°F to 180°F adjustable temp control (125°F to 170°F range for single element models) Meets or exceeds ASHRAE 90.1 Factory installed Temperature & Pressure Valve
Oil Fired Water Heaters 104,000-623,000 BTU
Oil-Fired Residential and Light-Commercial Water Heaters Bock water heaters are the USA’s most popular oil-fired residential and commercial oil-fired appliances. Capacities range from 32 gallons to 113 gallons with inputs from 104,000 to 623,000 BTU. The Bock® Model 32E water heater is the market leader in Energy Efficiency with a .63EF rating and 170 gallons First Hour Delivery. It meets the Department of Energy’s new higher energy standards coming in 2015 – no comparable competitive model meets those standards. Standard 5-year tank/heat exchanger residential warranty. Single Turboflue® helical-fin heat exchanger. Certified for use with Carlin® and Beckett® burners.
Commercial Electric Water Heaters
Available in 50, 80 and 119 gallon capacities with 6 to 54 kW and screw in style elements. Available with either Surface Mounted Thermostat or Immersion Thermostat.
Oil Fired Water Heater 400,000-1,500,000 BTU
Oil-Fired Commercial/Industrial Water Heaters Eleven models ranging from 400,000 BTU to 1,500,000 BTU in 150, 200 or 250 nominal gallon sizes. ASME construction is standard on all models. Wet-leg design offers continuous operation and additional heat transfer capabilities. Feature Turboflue® helical finned heat exchangers. Equipped with Wayne® external burners or optional Carlin® burners.
SideKick™ Indirect Water Heater
Coil-Heat Exchanger Indirect Water Heater Single-wall full throat 1-1/2” diameter internal coil heat exchanger. 30, 38, 45, 75 and 110 gallon capacities. Factory installed Aquastat on all models. Factory installed T&P Relief Value and Brass Drain Valve. Standard 7 year residential tank and heat exchanger warranty with a FREE upgrade to a limited lifetime warranty. 3 year commercial tank/heat exchanger warranty.
EnviroStor™ Dual-Coil Indirect Water Heater
Dual (upper and lower) Coil-Heat Exchanger Indirect Water Heater Two-coil indirect water heater is ideal for combination Domestic Hot Water and space-heating applications, or, use both coils in parallel to boost 1st hour performance up to 45% @ 200°F coil output. Single-wall full throat 1-1/2” diameter coil heat exchangers – upper and lower. 73 gallon and 108 gallon actual capacities. Standard 6 year residential tank and heat exchanger warranty; 3 year commercial warranty. 50SKE, 80SKE, 80SKDCE, 119SKE and 119SKDCE Models have 4500W electric heating element for supplemental heating when appliance is installed as solar-thermal water heater.
EnviroStor™ Large Volume Solar-Thermal Water Heater
Vertical or Horizontal Large Volume Solar-Thermal Water Heater with Multiple Coil-Heat Exchangers Capacities ranging from 175 gallons to 1,040 gallons actual volume. Two to sixteen standard single-wall or optional double-wall internal coil heat exchangers (quantity subject to tank capacity). Foam insulation with rigid acrylic exterior finish. ASME construction. Five-Year warranty.
Combi-Twin 76,000 BTU Commercial Gas Water Heater
80%TE Power Direct Vent Commercial Gas Water Heater with Space-Heating Internal Coil Heat Exchanger Radiant heating and Domestic Hot Water combined in one appliance! Available in 75 and 100 gallon capacities – vents with 3” or 4” PVC, ABS or CPVC plastic pipe. Standard 5-year tank/heat exchanger commercial warranty. Single Turboflue® helical-fin heat exchanger provides 80% TE Domestic Hot Water. 180°F maximum settable temperature. Single internal coil heat exchanger provides heat for space-heating applications. Installation friendly ezFITdimensions, connections, and controls. Natural Gas or Propane Burners.
Power Gas Water Heaters 400,000-1,500,000 BTU
80% TE Power Burner Gas Commercial/Industrial Water Heaters Eleven models ranging from 400,000BTU to 1,500,000 BTU in 150, 200 or 250 nominal gallon sizes. ASME construction is standard on all models. Wet-leg design offers continuous operation and additional heat transfer capabilities. Feature Turboflue® helical finned heat exchangers. Equipped with Power Flame™ external burner.
Power Gas Water Heater 104,000-623,000 BTU
80% TE Power Burner Gas Water Heaters Available in 32 to 113 gallon capacities with your choice of natural gas or LP gas burner. Standard 5-year tank/heat exchanger commercial warranty. Single Turboflue® helical-fin heat exchanger provides 80% Thermal Efficiency. Comes complete with a barometric draft control, spark ignition and 100% safety shut-off. Provided with Carlin® or Midco® powered burner.
ezFIT™ Power Direct Vent 76,000 BTU
80% TE Power Direct Vent Commercial Gas Water Heater Available in 75 and 100 gallon capacities and featuring 3” or 4” PVC, ABS or CPVC plastic vents. Standard 5-year tank/heat exchanger commercial warranty. Single Turboflue® helical-fin heat exchanger provides 80% Thermal Efficiency. 180°F maximum settable temperature. Installation friendly ezFIT dimensions, connections, and controls. Natural Gas or Propane Burners.
Energy Saver™ Atmospheric 250,000-725,000 BTU
80% TE Atmospheric Gas Water Heaters A wide variety of models ranging from 250,000 to 725,000 BTU input with Natural Gas or Propane. All models feature electronic ignition and automatic damper. ASME or non-ASME construction. Low Profile selection of 80 and 100 gallon models available. Hand Hole Cleanout.
ezFIT™ 76,000-199,000 BTU
80% TE Atmospheric Commercial Gas Water Heaters Featuring installation friendly ezFIT dimensions, connections, and controls in your choice of Natural Gas or L.P. Available in 75, 80, 90 and 100 gallon capacities and inputs ranging from 76,000 to 199,000 BTU/HR. Standard 5-year tank/heat exchanger commercial warranty. Single Turboflue® helical-fin heat exchanger provides 80% Thermal Efficiency. 180°F maximum settable temperature. Low NOx emissions (SCAQMD certified) standard with EZ75-135N, EZ80-156N, EZ80-199N and EZ100-199N models.
HEC 125,000-199,000 BTU Models
High Efficiency Condensing Low-NOx Commercial Gas Water Heaters Available in 60 gallon capacity with natural gas low NOx premix power burners which are SQAQMD compliant, or with an LP gas burner. The HEC also features electronic ignition and controls.